Paste tile adhesive TA12

Paste tile adhesive under the brand TA12 Romulo is a product based on synthetic polymers, micronized mineral powders and waterproofing compounds formulated with ionization technology, this product is ready to use and has a very strong adhesion to all types of surfaces and building materials.

Fast setting and hardening after application
Very high resistance to moisture, steam
Very high resistance to all types of oil materials
Very high resistance to acid and detergents
Waterproof and insoluble in water after drying
Ease of installation and saving time and money
Very good flexibility against cracking
Very good flexibility against the tiles falling off
Strength against building movements (vibration, contraction, expansion)

Pasting tiles on old tiles

Installing tiles on all types of clay surfaces

Installation of ceramic tiles on wooden surfaces

Installation of all kinds of stone, plastic and plastofoam

Installation of all kinds of interior and exterior decorative bricks

Installing all kinds of tiles, ceramics and antique stone

Installation on plaster, cement, tile, glass surfaces

Installation on concrete surfaces, prefabricated parts, panels

Clean the surface below the work from any dirt and grease and create a few lines on the desired surface with an ax or grinding stone, then apply the paste adhesive on the wall with a combed spatula with a maximum area of ​​one square meter and a thickness of 3-4 mm. And stick the wet tile on the surface within 3-5 minutes. The tiles installed on the wall will reach their final strength after 12-24 hours, and after this time, you can start the grouting, and the desired surface can be used two days after grouting. proper temperature
The direction of installing paste tile adhesive is 5-25 degrees Celsius.

Consumption : The consumption of paste tile adhesive depends on the type of work and how the ridges on the back of the ceramic tile are and is usually equal
4 to 5 kg for each square meter.

Romolo paste tile adhesive in packages of 1, 5 and 12.5 kg
It is produced and supplied.

The suitable temperature for storing the product is 10-30 degrees Celsius, the useful life of this product is one year provided that it is kept in a covered environment and away from moisture, freezing, extreme heat and direct sunlight.

Avoid direct contact with eyes and skin. Use gloves, glasses and appropriate clothing during application. In case of possible contact with eyes, wash immediately with lukewarm water for 15 minutes.