AP4 tile powder adhesive

Romolo tile powder adhesive with Ap4 brand is a product based on micronized mineral powders, oyster powder, white cement and chemical additives, which is formulated with ionization technology. The special features of this product include extremely strong adhesion to all types of construction materials, load reduction. Morde pointed out the construction and very easy use, especially for installing all kinds of ceramics, tiles and mosaics on the floor.

Easy horizontal installation
Speed ​​in preparation and execution
Fast drying and setting
Resistant to water, steam, moisture
Resistant to acid and all kinds of petroleum products
Can be used in all types of climates
Can be used in thin and thick layers on the floor
It has excellent adhesion to all kinds of building materials
It has flexibility to prevent the tile from cracking

Can be installed on all types of plaster, cement surfaces
Can be installed on all types of tiles, glass and ceramics
Can be installed on all kinds of wooden surfaces and all kinds of panels
Can be used as a glue for all kinds of light blocks
Can be installed on concrete, cement surfaces, prefabricated parts
Suitable for installing all types of tiles, ceramics and mosaics on the floor

Clean the desired surface from any pollution and if there is tile and cement, smooth it evenly, then combine each 4 kilos of powdered glue with one liter of water and mix thoroughly, with a slotted spatula enough of Add the mortar in the place of installation and behind the tile in one hand and install it on the desired surface. The usual amount of consumption is generally 4-5 kg ​​per square meter.
Attention:
The suitable temperature for using powder glue is 5-40 degrees Celsius. Romolo tile powder adhesive has very high adhesion due to low water absorption, and the best time to use it after mixing with water is 20-30 minutes.

Romolo tile powder adhesive is produced and supplied in 20 kg packages.

The suitable temperature for storing the product is 10-30 degrees Celsius, the useful life of this product is one year provided that it is kept in a covered environment and away from moisture, freezing, extreme heat and direct sunlight.

Avoid direct contact with eyes and skin. Use gloves, glasses and appropriate clothing during application. In case of possible contact with eyes, wash immediately with lukewarm water for 15 minutes.