Hablex AP2 powder adhesive

Heblex Romolo powder adhesive with the brand name ap2 is a product based on micronized mineral powders, oyster powder, black cement and chemical additives, which is formulated with ionization technology, the special features of this product include extremely strong adhesion to all types of construction materials, load reduction He pointed out that the building is dead and very easy to use, especially for the installation of light blocks in indoor and outdoor spaces.

Easy horizontal and vertical installation
Speed ​​in preparation and execution
Fast drying and setting
Resistant to water, steam, moisture
Resistant to acid and all kinds of petroleum products
Can be used in all types of climates
Can be used in thin and thick layers
It has excellent adhesion to all kinds of building materials
Flexible to prevent possible cracking or loosening

Suitable for installing all kinds of light blocks and Heplex
Suitable for installing all types of pressed bricks and ceramics
Suitable for installing all kinds of tiles, mosaics and ceramics
Suitable for installing all kinds of glass and light panels
Suitable for installing all kinds of concrete and light prefabricated parts
Can be used as ready mortar on all internal and external surfaces

Clean the desired surface from any contamination, then combine each 4 kilos of Hablex powder glue with one liter of water and mix thoroughly, using a slotted trowel, apply enough mortar at the installation site and on the block in one hand. and then install it on the desired surface. The usual amount of Heblex powder adhesive consumption is generally 4-5 kg ​​per square meter.

Attention:
The suitable temperature for using powder glue is 5-40 degrees Celsius. Heblex Romolo powder adhesive has high adhesion due to low water absorption and the best time to use it after mixing with water is 20-30 minutes.

Hablex Romulo powder glue is produced and supplied in 20 kg packages.

The suitable temperature for storing the product is 10-30 degrees Celsius, the useful life of this product is one year provided that it is kept in a covered environment and away from moisture, freezing, extreme heat and direct sunlight.

Avoid direct contact with eyes and skin. Use gloves, glasses and appropriate clothing during application. In case of possible contact with eyes, wash immediately with lukewarm water for 15 minutes.