MIO epoxy intermediate paint

Romolo MIO Epoxy Middle Paint is a product based on epoxy resin and polyamide hardener enriched with micaide iron oxide, which can play a significant role in protecting metal surfaces as an intermediate layer or lining. This paint has a relative resistance to humidity, water, alkaline and acidic environments, so it needs to be covered with an appropriate top coat for full protection.

Good adhesion to the bottom layer

Ability to run in high thicknesses

Creating suitable thickness for high thickness systems

Good resistance to abrasion and mechanical impact

Good resistance to corrosive agents due to the use of epoxy resin

and polyamide hardener for extreme weather conditions and all industrial environments

High corrosion resistance due to the inhibition of the pigment of MIO sheets from rapid penetration

Moisture and corrosive factors to the bottom layer

It can be used as an intermediate coating for all kinds of metal structures such as bridges

Industrial sheds, pipelines and transmission lines, tanks, submerged equipment

Shirin, all metal structures in coastal and OFF SHORE areas

The minimum degree of cleanliness of the desired surface based on the standard

Swedish is SA3, SA 2½, ISO 8501-1, also min

The profile (roughness) is 40 microns. The desired surface should be free of any contamination

such as dust, oil, grease, etc. cleaned, if since the effective time

If the middle layer is more than 72 hours old, it should be the level of the item

Comment after cleaning.

The following devices can be used to apply this color:

Spray device with air/pressure 3-4 atmospheres/nozzle opening 2-2.2 mm

Airless spray / pressure 7-6 atmospheres / nozzle opening 0.019-0.017 mm

Electric or pneumatic mixer, roller, brush (for small surfaces)

First, mix the two components separately and then add the hardener (component a) to the color (component b) according to the mixing percentage mentioned on the label and mix until it becomes completely uniform. After 10 minutes, according to the type of spraying, thinner add to it and mix it until it is uniform and ready to use. Considering the useful life of the product, after mixing, you should mix the amount of paint that can be consumed in this period of time.

Romolo MIO Epoxy Middle Paint is produced and supplied in 25 kg drums.

The suitable temperature for the storage of Romolo zinc rich epoxy primer product is 5-40 degrees Celsius, the useful life of this product is 12 months, provided that it is stored in the original container, in a covered environment, away from moisture, freezing, extreme heat and direct sunlight. to be

It is recommended to refrain from inhaling the solvent vapors of this color in closed spaces and use appropriate safety equipment as much as possible and wash with plenty of water in case of contact with skin and eyes, this color is flammable and should be away from heat, sparks and flames. To be distant