Epoxy top color

Romolo epoxy top paint is a product based on epoxy resin and polyamide hardener, high adhesion, suitable resistance to chemicals and solvents, high resistance to water and wet conditions, and high abrasion and impact resistance are the advantages of this paint. Due to the lack of UV resistance, it is not recommended to use this color as a final layer exposed to sunlight.

Excellent adhesion to the middle color

Excellent corrosion resistance

Excellent resistance to impact and bending

Excellent resistance to all kinds of weather conditions

Excellent resistance to alkalis and acids

Excellent resistance to water and chemicals

Surface coating of equipment used in the oil industry

Surface coating of equipment used in the gas industry

Protective covers of metal structures such as bridges

Protective coating of metal instruments in the petrochemical industry

Protective coating of metal devices of industrial sheds

Types of concrete structures that are not exposed to direct sunlight

Steel structures that are not exposed to direct sunlight

The desired surface should be cleaned from any pollution such as dust, oil, grease, etc., and the surface should be sand blasted to the standard cleanliness of Sa2.5-Sa3.

The following devices can be used to apply this color:

– Spray with air :(pressure 3-4 atmospheres) (nozzle opening 1.6-1.8 mm)

– Spray without air :( pressure 6-7 atmospheres) (nozzle opening 0.43-0.53mm)

– roller

– brush (for small surfaces)

First, mix the two components separately and then add the hardener (component B) to the color (component A) according to the mixing percentage mentioned on the label and mix until it becomes completely uniform. After 10 minutes, add the thinner according to the type of spraying. And stir it until it is uniform and ready to use. Considering the shelf life, after mixing, you should mix the amount of paint that can be consumed in this period of time. – The ambient temperature for coloring should be 10-40 degrees Celsius. The temperature of the surface during painting should be at least 3 degrees Celsius above the dew point and the air humidity should be at least 80%, and the surface should be free of ice and moisture.

Romolo epoxy top paint is produced and supplied in 20 kg drums.

The suitable temperature for the storage of Romolo zinc rich epoxy primer product is 5-40 degrees Celsius, the useful life of this product is 12 months, provided that it is stored in the original container, in a covered environment, away from moisture, freezing, extreme heat and direct sunlight. to be

It is recommended to refrain from inhaling the solvent vapors of this color in closed spaces and use appropriate safety equipment as much as possible and wash with plenty of water in case of contact with skin and eyes, this color is flammable and should be away from heat, sparks and flames. To be distant.