AP6 porcelain powder adhesive

Romulo’s white porcelain powder glue with the AP6 brand is a product based on micronized mineral powders, oyster powder, chemical additives and waterproofing compounds, which is formulated with ionization technology. The special features of this product include extremely strong adhesion to all types of construction materials. He pointed out the reduction of the dead load of the building and very easy application on all kinds of surfaces, especially for the installation of all kinds of porcelain stones and ceramics in indoor and outdoor spaces.

Speed ​​in preparation and execution
Fast drying and setting time
Easy vertical and horizontal installation
Can be used in thin and thick layers
Can be used in all types of climates
High resistance to water, steam, moisture
High resistance to acid and all kinds of petroleum substances
It has excellent adhesion to all kinds of building materials
It has flexibility to prevent cracks or falling of tiles and stones

Can be installed on all types of plaster, cement surfaces
Can be installed on all types of tiles, glass and ceramics
Can be installed on all kinds of wooden surfaces and all kinds of panels
Can be installed on concrete, cement surfaces, prefabricated parts
Suitable for installing all kinds of porcelain stones and ceramics on the facade
Suitable for installing all kinds of porcelain stones and ceramics on the floor and body
Suitable for installing all types of tiles, ceramics, antique stone and plastic

Clean the desired surface from any pollution and if there is tile and cement, smooth it evenly, then combine each 4 kilos of powdered glue with one liter of water and mix thoroughly, with a slotted spatula enough of Add the mortar in the place of installation and behind the tile in one hand and install it on the desired surface. The usual amount of consumption is generally 4-5 kg ​​per square meter.

Attention:
The suitable temperature for using powder glue is 5-40 degrees Celsius. Romolo white porcelain powder glue has a very high adhesion due to its very low water absorption and almost 1%, and the best time to use it after mixing with water is 15-20 minutes.

Romolo’s white porcelain powder adhesive is produced and supplied in 20 kg packages.

The suitable temperature for storing the product is 10-30 degrees Celsius, the useful life of this product is one year provided that it is kept in a covered environment and away from moisture, freezing, extreme heat and direct sunlight.

Avoid direct contact with eyes and skin. Use gloves, glasses and appropriate clothing during application. In case of possible contact with eyes, wash immediately with lukewarm water for 15 minutes.