Romolo Plus Bonding Powder Model TG + is a high quality powder that fills the joints between tiles and ceramics. You can use this product for bonding and grouting all kinds of surfaces. This coating is mainly used to improve the appearance, protect or increase the resistance of materials against external factors such as water corrosion, humidity, heat, etc. It is a product based on cement, mineral powders, oyster powder, chemical additives and waterproofing compounds formulated with ionization technology.
TG + banding powder is a completely waterproof product and it is prepared quickly and is easy to apply. One of the practical features of this product is its fast drying time, which dries in a short time and sticks to all commonly used materials. This powder is compatible in all climates and can be used from the north to the south of the country. Because this product is in close proximity to water and is used in bathrooms and toilets, it is completely waterproof, anti-acid, anti-dandruff and antibacterial. This powder is very strong and its color remains stable even against the strongest detergents.
If your toilet and bathroom is damp and it transmits moisture to its lower and side walls, you should fix and repair the gutters and waterproof your gutters. First, scrape off the old straps and fill the gaps between the straps with this product in the form of paste or slurry.
The use of Romolo Plus strapping powder
Plus Romulo strapping powder is used for different purposes. As a protective layer on the surfaces of concrete, brick, cement and other materials, it protects against erosion, corrosion, bursting and analysis of materials against various environmental factors. Romolo plus bonding powder is used in various colors to create a beautiful and desirable appearance on the building and surfaces.
This coating is completely waterproof and moisture-proof and can be used as a protective layer against water and moisture penetration. In some cases, sanding powder is used as a leveling agent on uneven or uneven surfaces to smooth and level the surface. By adding strapping powder, resistance and hardness increase and cracks and damage are prevented. Romulo plus binding powder has various uses and is widely used. This product is suitable for using all kinds of ceramic tiles, stone and all kinds of services, facades, saunas and jacuzzis, all kinds of plastic and foam plastic and decorative glass.
Waterproof and acid-proof strapping powder
Plus TG+ strapping powder is water and acid resistant and is a type of protective coating that is made of special materials that have the ability to resist water and acid. This type of coating is usually used on surfaces that have direct contact with water or acid, such as concrete surfaces in swimming pools, bathroom floors, ceramic sealing inside and outside buildings, etc. This coating can be used as a protective layer on cement, concrete or plaster surfaces that are exposed to water and moisture to prevent water penetration and damage caused by it.
By applying this protective coating, the useful life of surfaces can be increased against erosion, corrosion and destruction caused by water and acids. This coating can also resist temperature changes and protect surfaces. In general, waterproofing powder and romulo acid, which is TG+. An important tool in the construction industry, it is used as a protective layer on surfaces to prevent damage caused by water and acids.
How to use bandaging powder
The use of TG + banding powder requires several main steps. The general method to use is as follows:
Before applying and performing, clean your surface and remove any particles and pollutants. Bandakeshi Plus+TG powder is based on cement and has oyster powder that you can mix with water and use as a paste or slurry. After preparing the powder, apply it on the desired surface with a brush or cark and note that the application of the coating should be done uniformly and without interruption.
After applying the coating, give the coating time to dry and adhere to the surface. This time may depend on the type of powder and environmental conditions. Finally, after it is completely dry, you can check the surface for any defects or areas that can be improved and proceed with finishing and cleaning. It is very important to be careful in every step of the application process to ensure the quality and performance of the coating. If you have a problem at any stage of implementation, you can contact Romolo consultants. The suitable working temperature is 5 to 40 degrees Celsius and the strapping space can be used at least after 24 hours.
Plus Romolo strapping powder in various colors
Romolo TG+ banding powder is available in white, cream, gray, brown and black colors with weights of 1 kg and 4 kg. The production of this product in various and attractive colors gives a beautiful appearance to the interior and exterior environments of your building. Each kilogram of this product in paste form is enough for 3 square meters and in slurry form for 6 square meters.
The price of Romolo’s strapping powder plus
Romolo TG+ banding powder is available at an affordable price. This product is completely economical due to its unique features, and after using it, you will notice the high quality of this product. To buy this product, you can go to Romolo’s official website at romolo.ir and register and finalize your order.