پرفروشترین محصولات
RO9 insulating adhesive
۲۵۰,۰۰۰ – ۱,۴۰۰,۰۰۰
The use of insulating glue instead of isogam is one of the optimal solutions that attracted a lot of attention after its introduction. In the past, the only material that was used for insulation was the insulation process, which was used in different parts of the building! But for many years, the progress of the industry in the field of nano products production has replaced the traditional and old methods of insulation glue. While in our country, the use of nano insulation instead of Izogam has recently found an audience. Therefore, in the following, we intend to introduce you to its advantages, uses and purchase factors by providing more explanations about what and how this type of glue works.
Ro9 is an insulating adhesive alternative to isogam. It is an effective and flexible solution for insulating the roof and other surfaces. Ro9 insulation glue and silicone insulation paint are both the same base, and the difference between silicone paint and Ro9 glue is that it has grain color, and it has a price difference because of having grain color. These two Romolo products are definite substitutes for Isogam. Both are water based and have a high concentration.
After drying, a continuous and seamless insulation layer is created. Very high resistance to water and moisture, high flexibility, quick and easy installation, long life are important and essential features of isogam alternative insulation. It has a very low cost compared to Isogam and does not require specialized equipment for application. Isogam replacement insulation creates a flexible and water-resistant layer after drying.
What is insulation glue?
The insulation adhesive is designed and manufactured by using nano technology, which acts superficially and penetratingly. In fact, if you use this type of glue, you will see that in addition to the desired surface being insulated; It penetrates between 3 and 5 mm to the depth of the structure and causes greater resistance and better performance of the glue.
On the other hand, Isogam is a completely superficial layer and does not cover seams and pores completely separately. For this reason, the substitute glue for Isogam and Qirguni is nano glue or insulating glues that show better performance.
Before the introduction of insulating glue, various parts of the building, including the roof, bathrooms, swimming pools, jacuzzis, saunas, water tanks and other parts that are exposed to water, were sealed using Izogam! But the use of this glue is far more easy to use and functional due to the advantages it can have.
Regarding the structure of this glue, it should be said that colored resin has been used to provide practical suitability. Using this glue can eliminate the need to repair or replace parts on surfaces that need sealing. As a result of repairing and repairing the damaged areas that have suffered corrosion, using this glue can achieve the best results.
Application of insulating glue
According to the structure proposed for insulating glue, it can be used for various applications. This adhesive can be used in any field where there is a need for sealing and resistance against water penetration. In the following, each of these application options is discussed separately:
Bathroom flooring
In the toilet and bathroom, water comes in contact with the floor the most, and if there is no insulation, the possibility of water leakage and penetration to the lower floors will be raised. As a result, in order to prevent damage to the building and water penetration, you can use nano glue instead of isogam. In this case, the concrete structure of the structure is protected to a large extent.
Building facades
Buildings are also destructible due to exposure to snow and rain. Considering that the strength of the structure can be damaged under the influence of these environmental factors, the need to protect the concrete texture will be raised. In this way, the insulating adhesive will have the ability to insulate and seal.
Pool sealing
The pool is one of the other substrates that are in direct contact with water and must be able to maintain it and prevent penetration. Nano glue with sealing properties creates an ideal and resistant barrier against water penetration into the pool.
Water tanks
Water tanks that are used in agricultural land are other common options for applying insulating glue instead of isogam. Because the failure to use insulating glue or any other sealed structure can lead to water infiltration into the highway concrete structure, which can cause its waste.
Apart from these cases, from insulating glue to make waterproof paste glue and strong water-based kinetics, waterproofing cellulose coatings, acrylic and plastic paints for special applications, in the combination of cement mortars and grouts to compensate for mixing and other such cases. It is taken advantage of.
Advantages of insulating glue
Keeping in mind what has been said about the quality and performance of insulating glue instead of Izogum, naturally, various advantages can be discussed and investigated with respect to this glue. In the following, some positive and obvious features of using nano glue instead of isogam will be discussed in general:
– The use of insulating glue brings relatively more speed in the process.
-Insulating glue does not need heavy and different tools, so the ease of implementation increases to a great extent.
– The strength and quality of nano glue is very high and due to its sealing ability, it performs better than other insulation methods.
Introducing the best color coating
As mentioned, insulating adhesives form a colored coating as a resin structure. According to the popular applications of this glue, various brands have started to produce it. Therefore, choosing an ideal brand with high quality will achieve much better results.
Romulo’s Ro9 insulation glue is an example of high quality types that can prevent water penetration due to its structural features. This glue is based on latex, polymer and resin modified with water and milky white in color. The use of these compounds, along with the color intended for this type of glue, will be a factor for ideal color coverage and high-quality performance.
Among the features that should be considered in relation to this type of glue, it is anti-moss, anti-algae and antibacterial. In this case, naturally, the glue in question will perform much better in cold and dry, hot and humid climates.
Purchase and price of insulation glue instead of Izogam
The price of the best cheap insulation alternative to Isogam is one of the important factors in the process of buying insulation glue. In this regard, it should be said that the price of insulating glue is discussed according to the brand and its volume. As a result, the larger the volume of glue, the higher the price will be.
Features of this type of insulating glue:
High resistance to UV and heat, high flexibility, long service life, and easy repairability are the features of isogam alternative insulation. The implementation cost is much lower than the Isogam method, and it takes time to dry, and it should not be in direct contact with water during the drying time. You don’t need an expert force for implementation, and you can contact Romulo experts at any stage of the implementation. Isogam alternative insulating adhesive has a long lifespan, is environmentally friendly and has the ability to breathe. Isogam alternative insulating adhesive does not require periodic maintenance and does not degrade over time in extreme weather conditions.
In areas with high rainfall, insulating adhesive is a better choice instead of Izogam. Also, in areas with strong sunlight, UV resistant adhesives perform better. You can contact Romolo experts to check the features and make the optimal and efficient choice at each stage of implementation.
To seal the toilet, if your toilet is damp, you must first remove the cause of the damp. Repair your straps or scrape them completely with a wire brush and mix Ro9 insulation adhesive with plus strapping powder and insulate your straps. Then you can coat your straps thickly with Ro9 insulating glue.
What is isogham colorless liquid?
Isogam colorless liquid is a modern and advanced type of insulation that is applied in liquid form and creates a colorless, transparent and resistant layer after drying. This type of isogam is suitable for environments that need to maintain appearance and transparency. Because it is colorless and transparent, this feature helps to preserve the appearance of the surface, especially for surfaces that need a beautiful effect. Like other insulations, colorless liquid isogam is completely waterproof and prevents water from penetrating to the subsurface. Its colorless and transparent nature makes it possible to preserve the appearance of the surface, especially for surfaces that need a beautiful effect. This insulation remains flexible after drying and can withstand thermal changes and surface movements. Because it is colorless, it preserves the appearance of the underlying surface and can be applied to various materials such as stone, tile, and glass.
Colorless liquid isogam is an excellent option for insulating various surfaces that need to maintain appearance and transparency. With advantages such as easy installation, high flexibility, and resistance to different weather conditions, this type of insulation can be used as an effective alternative to traditional insulation methods. However, the cost and the need for sufficient time for complete drying must be considered.
Isogam paint is a type of insulating coating that, in addition to insulating properties, can be applied as a color and is usually used for further protection and improving the appearance of the surface. These colors are especially suitable for use on roofs, walls and other exterior surfaces. Isogam paint acts as an effective waterproof insulation and prevents water from penetrating to the lower surfaces. These colors are highly flexible and can withstand thermal changes and surface movements. Isogam paints usually have good resistance to UV rays and protect the surface. These colors have good adhesion to all types of surfaces such as concrete, asphalt, metal, etc. These paints can be made in different colors which help to improve the beauty of appearance.
Isogam paint is an effective and versatile option for insulating and protecting different surfaces. With advantages such as easy installation, high flexibility, UV resistance and improved appearance, this type of paint can be used as a suitable solution for insulation and extending the life of surfaces. However, the cost and the need for sufficient drying time should be considered.
Using insulating paints instead of Isogam is a new method for insulating different surfaces such as roofs, walls and terraces. By combining insulation and coating properties, these colors provide the possibility of effective insulation and beautiful appearance.
Using insulating colors instead of isogam can be an effective and beautiful solution for insulating different surfaces. In addition to the benefits of insulation, this method helps to improve the appearance and increase the lifespan of the surface. However, you should consider cost, maintenance requirements, and surface conditions and choose the best type of insulation paint based on the specific needs of the project.
In addition to the mentioned adhesives, Romolo company produces types of:
1.Sealing glue
2.concrete glue
3.Slab powder tile adhesive
And even porcelain powder tile adhesive works.
Among other products of Romolo, we can mention a variety of colors, such as: black silicone paint, white silicone paint, and even blue silicone paint.
All the products are produced with the best quality for you, dear customers, and can be sent to all parts of Iran. You can also refer to the relevant links to buy Bandakshi Plus powder or sealant products.