Romolo tile adhesive powder is based on cement, mineral micronized powders and chemical additives formulated with ionization technology.
Romolo tile adhesive powder is based on cement, mineral micronized powders and chemical additives formulated with ionization technology. Special features of this product are strong adhesion to a variety of building materials, very easy to use for the installation of different types of ceramic, tiles and mosaic on the floor.
Applicable to all types of climates | Excellent adhesion to all types of building materials | High speed in preparation and no sensitivity and odor | High resistance and highly impervious to water after drying | High flexibility to avoid cracking or falling tile and stone | Easy vertical installation, applicable to thin and thick layers.
Applicable as AAC blocks glue | Applicable as mortar for a variety of blocks | Applicable on plaster surfaces, cement surfaces, tile, glass and clay surfaces | Installation of all kinds of tiles, ceramics, antique and plastic stones | Installation of all kinds of porcelain ceramics in floors, walls, and elevations.
How to use
Cleans the surface of any impurities, for niform tile and cement make scratch for more adhesion on the surface Then mix each 4kg of glue with 1liter of water and mix thoroughly apply mortar in place and behind the tile and install at the desired level. Consumption is generally 4 – 5kg per square meter. Suitable temperature for the use of white porcelain powder is 5 – 35°c.
CAUTION : Romolo tile adhesive powder due to low water absorption has good adhesion and he best time to use it after mixing with water is 20 – 30 minutes.
Romolo tile adhesive powder is available in 20kg bags.