How to use : For slurry preparation : Cleans the surface of any contamination and wet with damp sponge Then mix each 1kg of Romolo tile grout powder with 1liter of water and pour it on the surface. Using a rubber brush and move completely until the slurry tightened. clean the remaining material on the tile with a damp sponge Consumption is generally 1kg Romolo tile grout powder for 6 square meter slurry.
In order to use this tile grout : Cleans the surface of any contamination and Pour Romolo tile grout powder into a bucket and gradually add the water and mix well to form a paste. Then fill the joints thoroughly by using a rubber trowel. Consumption is generally 1kg Romolo tile grout powder for 3 square meter grouting.
Caution : Suitable temperature for the use of Romolo tile grout powder is 5 – 35° c and bonded space can be used after 24 hours.
Caution : For bonding of all kinds of Brick, fireplace brick and pool tile Consumption increases 2 to 3 times and for bonding and slurry porcelain ceramics Consumption will behalf.
Caution : For longer shelf life it is recommended, mix Each kilo of Romolo tile grout powder with three cups of water and 1 cup of insulation adhesive and then use (special for shiny and luminous tile grout)
