Heblex block powder adhesive is a product based on micronized mineral powders, oyster powder and waterproofing compounds formulated with ionization technology. The special features of this product include extremely strong adhesion to all types of building materials, reducing the dead load of the building, and very easy application in all types of light weight blocks, AAC blocks and other types of building blocks. Also, this product is a great alternative to construction mortars.
| Properties | |
|---|---|
| Special Weight | 2.1gr/cm3 |
| Physical mode | Powder |
| PH | 14 |
| Color | White |
Download Datasheet
Products Specifications
Heblex block powder adhesive is a product based on micronized mineral powders, oyster powder and waterproofing compounds formulated with ionization technology. The special features of this product include extremely strong adhesion to all types of building materials, reducing the dead load of the building, and very easy application in all types of light weight blocks, AAC blocks and other types of building blocks. Also, this product is a great alternative to construction mortars.
In order to check some of the unique features of this product, we can mention the following items: speed in preparation and execution, drying and fast setting. Resistant to water, steam, humidity, acid and all kinds of oil. It has flexibility to prevent the block from cracking or falling. It has excellent adhesion to all types of surfaces and building materials. Prevent water penetration after drying. Can be used for all types of AAC blocks. Can be used as construction mortar.
Application
Suitable for installing all types of ceramic and mosaic tiles. Can be installed on plaster, cement, tile, glass and pottery surfaces. Can be installed on concrete, prefabricated parts, panel and wooden surfaces. Can be installed on all types of AAC blocks and Heplex blocks. Can be installed on all kinds of building blocks with light weight. Excellent alternative as construction mortars.
How to use
Clean the desired surface from any pollution and if there are tiles and cement, then mix each 4 kilos of glue with one liter of water and mix thoroughly, with a slotted trowel, add enough mortar. Rub the place and back of the tile with one hand and install it on the desired surface. The amount of consumption is generally 4-5 kg for each square meter. The suitable ambient temperature for using tile powder glue is 5-35 degrees Celsius.
Note: Romolo AAC tile powder adhesive has good adhesion due to low water absorption, and the best time to use it is 7-10 minutes after mixing with water.
Packing
Romolo AAC tile powder adhesive is supplied in a 20 kg bag.
