Romolo White porcelain tile adhesive powder is a product based on mineral micronized powders, mussel powder and chemical additives that formulated with ionization technology.
Romolo White porcelain tile adhesive powder is a product based on mineral micronized powders, mussel powder and chemical additives that formulated with ionization technology. Special features of this product are strong adhesion to a variety of building materials, reduce a dead load of the building and very easy to use for installation of different types of stone, ceramic and porcelain tiles indoors and outdoors.
Applicable to all types of climates | Excellent adhesion to all types of building materials | High resistance and highly impervious to water after drying | High speed in preparation and no sensitivity and odor | High flexibility to avoid cracking or falling tile and stone | Easy vertical and horizontal installation, applicable to thin and thick layers
Applicable on concrete surfaces, prefabricated parts, panel and wood surfaces | Applicable on plaster surfaces, cement surfaces, tile, glass, and clay surfaces | Installation of all kinds of tiles, ceramics, antique and plastic stones | Installation of all kinds of porcelain ceramics in floors, walls, and elevations | Installation of all kinds of porcelain ceramics in floors, walls, and elevations.
Cleans the surface of any contamination, if you have uniform tile and cement, make a scratch for more adhesion on the surface Then mix each 4kg of glue with 1liter of water and mix thoroughly apply mortar in place and behind the tile and Install at the desired level. Consumption is generally 4 – 5 kg per square meter. Suitable temperature for the use of white porcelain powder is 5 – 35°c.
CAUTION : Romolo white porcelain tile adhesive powder due to low water absorption and almost one percent, It has very high adhesion and The best time to use it after mixing with water is 15 – 20 minutes.
Romolo white porcelain tile adhesive powder is available in 20kg bags.