
Romolo epoxy polyamide paint is a product based on epoxy resin and polyamide hardener. High adhesion, good resistance to chemicals and solvents, high resistance to water and wet conditions, and high abrasion and impact resistance are the advantages of this paint. Due to the lack of UV resistance, it is not recommended to use this color as a final layer exposed to sunlight.


Properties | |
---|---|
Fam | unlimited |
gloss | semi-gloss - glossy |
Volume of solids | 2 ± 25 |
density and hardener | 0.1 ± 1.35 |
coverage | (50µ D.F.T) 12.2 m2/litr |
drying time | 3 - 4 hours |
Dry time for handling | 12 - 24 hours |
Complete drying time | 7 days |
Shelf life after mixing | 8 hours |
Time to apply the next layer | 8 - 12 hours |
The above information is based on the working temperature of 25 degrees.


Romolo epoxy polyamide paint is a product based on epoxy resin and polyamide hardener. High adhesion, good resistance to chemicals and solvents, high resistance to water and wet conditions, and high abrasion and impact resistance are the advantages of this paint. Due to the lack of UV resistance, it is not recommended to use this color as a final layer exposed to sunlight.
Some of the unique features of this product include : excellent resistance to water, chemicals and atmospheric factors | Excellent adhesion to the middle color | Excellent corrosion resistance | Excellent resistance to impact and bending | Excellent resistance to alkalis and acids.
Protective coating of metal structures such as bridges, industrial sheds and petrochemicals | All concrete and steel structures that are not exposed to direct sunlight | Surface coating of equipment used in oil and gas industries.
Surface preparation: The desired surface should be cleaned from any pollution such as dust, oil and grease, etc. and the surface should be sandblasted to the standard cleanliness of Sa2.5-Sa3.
How to use: The following devices can be used to apply this color :
- Spray with air: (pressure 3-4 atmospheres) nozzle opening 1.6-1.8 mm
- Airless spray: (pressure 6-7 atmospheres) nozzle opening 0.43-0.53mm
- Roller
- Brush (for small surfaces)
Romolo ionized polyamid epoxy paint is produced and supplied in 20kg buckets.







