Romolo paste tile adhesive is a product based on synthetic polymers, micronized mineral powders and sealing compounds. Formulated with ionization technology, this product is ready to use and has a very strong adhesion to various surfaces and building materials.
Properties | |
---|---|
Special Weight | 1.4gr/cm3 |
Physical mode | Paste |
PH | 8 |
Color | White |
Installation temperature | 5 – 35° c |
Download datasheet
Products Specifications
Romolo paste tile adhesive is a product based on synthetic polymers, micronized mineral powders and sealing compounds, which is formulated with ionization technology, this product is ready to use and has a very strong adhesion to various surfaces and building materials.
Fast grip and hardening after execution | Sealing and not dissolving in water after drying | Ease of installation and save time and money | Very good flexibility against cracking or falling tiles | Very high resistance to moisture, steam, acid and petroleum products | Strength against building movements (vibration, contraction, expansion)
Application
Paste the tile on the old tile | Installation on a variety of clay and wood surfaces | Installation of all types of stone, plastic and plastofoam | Installation on gypsum, cement, tile, glass surfaces | Installation on concrete surfaces, prefabricated parts, panels | Installation of ceramic tiles on all vertical surfaces
How to use
Clean the underside of the work from any dirt and grease and create a few lines on the desired surface with an ax or milling stone, then apply the paste glue on the wall with a comb spatula with a maximum width of one square meter and a thickness of 3-4 mm. And stick the wet tile on the surface for 3-5 minutes. The tiles installed on the wall reach their final strength after 12-24 hours, and after this period, the bonding can be started and can be used two days after the bonding of the desired surface. The suitable temperature for installing paste tile adhesive is 25-5 degrees Celsius.
Note : The amount of paste adhesive used depends on the type of substructure and how the protrusions behind the ceramic tiles and is usually equal to 3 to 4 kg per square meter.
Packing
Romolo paste tile adhesive is supplied in 12kg anti-UV bags.