Romolo’s ionized tile adhesive powder has gone through the process of ionizing under the license of Europe, thus it has a higher quality than other similar products.
| Properties | |
|---|---|
| Special Weight | 2.1gr/cm3 |
| Physical mode | Powder |
| PH | 14 |
| Color | White |
Download datasheet
Products Specifications
Romolo’s ionized Multi plus tile adhesive powder has gone through the process of ionizing under the license of Europe, thus it has a higher quality than other similar products. Special features of this product are strong adhesion to a variety of building materials, reduce a dead load of building and very easy to use for Installation all types of surfaces.
Easy to install and save time and cost | Excellent adhesion to all types of building materials | High flexibility to avoid cracking or falling tile and stone | High speed in preparation and no sensitivity and odor | High resistance to moisture, steam, acid, and petroleum | Applicable to all types of climates and applicable to high altitude | High speed in preparation and performance, fast drying and fast rigid
Application
Applicable in a variety of water tanks, pools, saunas and jacuzzi | Installation of all kinds of stone slabs on the exterior and interior | Installation of all kinds of tiles, ceramics, antique and plastic stones | Installation of all kinds of porcelain ceramics in floors, walls, and elevations | Applicable on plaster surfaces, cement surfaces, tile, glass, and clay surfaces | Applicable on concrete surfaces, prefabricated parts, panel and wood surfaces.
How to use
Cleans the surface of any impurities, for uniform tile and cement, make a scratch for more adhesion on the surface Then mix each 4kg of glue with 1liter of water and mix thoroughly apply mortar in place and behind the tile and install at the desired level. Consumption is generally 4 – 5kg per square meter. Suitable temperature for the use of multi plus tile adhesive powder is 5 – 35°c.
CAUTION : Romolo multi plus tile adhesive powder due to very low water absorption and almost zero percent, it has very high adhesion and the best time to use it after mixing with water is 7 – 10 minutes.
Packing
Romolo multi plus tile adhesive powder is available in 20kg bags.
