IONIZED TILE GROUTs
Category : Tile grout powder
Colored
Shiny
Luminous
- Features Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Weight : 2kg| 5kg| 20kg
- Physical mode : Powder
- Thermal stability °80
- Color : Different

IONIZED TILE GROUTs
Category : Tile grout powder
Colored
Shiny
Luminous
Quality :
Transfer speed :
Costumer service :
- Features Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Weight : 2kg| 5kg| 20kg
- Physical mode : Powder
- Thermal stability °80
- Color : Different


Producer : Romolo
Function : 5 / 5 Customer satisfaction rate


Quality authenticity guarantee

IONIZED TILE GROUTs
Category : Tile grout powder
Colored
Shiny
Luminous
Quality :
Transfer speed :
Costumer service :
- Features Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Weight : 2kg| 5kg| 20kg
- Physical mode : Powder
- Thermal stability °80
- Color : Different

Producer : Romolo
Function : 5 / 5 Customer satisfaction rate

Quality authenticity guarantee











Physical and chemical properties |
|
Special Weight |
2.78-2.55 gr/cm3 |
color |
variety of colors |
physical mode |
powder |
Thermal stability |
80 c |
Installation temperature |
5-35 c |
APPLICATION :
Special for grouting and bonding of all kinds of tiles, ceramics, antiques, and stones.
Special for grouting and bonding of all kinds of plastic foam, plastic and decorative glass.
Grouting and bonding of all kinds of bathrooms and toilets, facade, Sauna, and Jacuzzi.
Grouting and bonding of all kinds of brick, fireplace brick and decorative brick.
Grouting and bonding of all kinds of waterfront, courtyard stone, and pool tile.
HOW TO USE :
How to use: For slurry preparation: Cleans the surface of any contamination and wet with damp sponge Then mix each 1 kg of Romolo tile grout powder with 1 liter of water and pour it on the surface. Using a rubber brush and move completely until the slurry tightened. clean the remaining material on the tile with a damp sponge Consumption is generally 1 kg Romolo tile grout powder for 6 square meter slurry.
In order to use this tile grout: Cleans the surface of any contamination and Pour Romolo tile grout powder into a bucket and gradually add the water and mix well to form a paste. Then fill the joints thoroughly by using a rubber trowel. Consumption is generally 1 kg Romolo tile grout powder for 3 square meter grouting.
CAUTION : Suitable temperature for the use of Romolo tile grout powder is 5-35 ° C and bonded space can be used after 24 hours.
Caution 2 : For bonding of all kinds of Brick, fireplace brick and pool tile Consumption increases 2 to 3 times and for bonding and slurry porcelain ceramics Consumption will behalf.
Caution 3 : For longer shelf life it is recommended, mix Each kilo of Romolo tile grout powder with three cups of water and 1 cup of insulation adhesive and then use (special for shiny and luminous tile grout)
PACKING :
Romolo tile grout powder is available in 2, 5 and 20kg bags.
HOW TO MAINTAIN :
Suitable temperature for maintain of tile adhesive is 10-30 ° C The shelf life of the product is 12 months in the original and unopened packaging. Keep away from direct sunlight, cold, extreme heat, and frost.
SAFTEY :
Avoid direct contact with eyes and skin, wear gloves, glasses, and appropriate clothing during the run. In case of contact with eyes, rinse immediately with lukewarm water for 15 minutes.






