Ionized insulation adhesive
Category : Ionized adhesive
- Application : Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Particle size : 17 Micron
- Weight : 1L | 3L| 9L
- Physical mode : Liquid
- Color : White

Ionized insulation adhesive
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Application : Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Particle size : 17 Micron
- Weight : 1L | 3L| 9L
- Physical mode : Liquid
- Color : White


Producer : Romolo
Function : 5 / 5 Customer satisfaction rate


Quality authenticity guarantee

Ionized insulation adhesive
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Application : Waterproof | Anti-acid | Anti-bacterial
- Quality : Improved (ionized)
- Particle size : 17 Micron
- Weight : 1L | 3L | 8L
- Physical mode : Liquid
- Color : White

Producer : Romolo
Function : 5 / 5 Customer satisfaction rate

Quality authenticity guarantee











Physical and chemical properties |
|
Special Weight |
1.01 gr/cm3 |
color |
white |
physical mode |
liquid |
PH |
14 |
Particle size |
0.17 μm |
APPLICATION :
Applicable for sealing pools, sealing all kinds of water views and all moisture surfaces.
Applicable for a color primer on different surfaces.
Applicable for making paste waterproof adhesive.
Applicable for making strong water-based connexins.
Applicable for coatings sealing, acrylic, and plastic colors.
Applicable for tanks sealing, and sealing all fittings and pipes.
Applicable for roof sealing, services sealing, Sauna, and Jacuzzi sealing.
HOW TO USE :
For sealing surfaces: : Cleans the surface of any impurities if the surface has a cavity, fill it with the same mortar then apply Romolo insulation adhesive once horizontally and once vertically with brush or pistol.one liter of Romolo insulation adhesive is enough per square meter.
For sealing concrete: add Romolo insulation adhesive to the ready-mixed concrete inside the mixer, usual usage per cubic meter of concrete is half to one liter of insulating adhesive, avoid adding Romolo insulation adhesive to dry cement.
For sealing acrylic and plastic colors : Mix and apply three modules of paint with two modules of Romolo insulation adhesive
For sealing tile grout powder: Mix and apply each kilogram of tile grouting powder with 2 modules of water and 1 module of Romolo insulation adhesive.
CAUTION : Suitable temperature for the use of Romolo insulation adhesive is 5-35 ° C.Note: Romolo insulation adhesive drying time is between 12 – 72 hours
PACKING :
Romolo insulation adhesive is available in 1, 3, 9 Lit buckets.
HOW TO MAINTAIN :
Suitable temperature for maintain of tile adhesive is 10-30 ° C The shelf life of the product is 9 months in the original and unopened packaging. Keep away from direct sunlight, cold, extreme heat, and frost.
SAFTEY :
Avoid direct contact with eyes and skin, Wear gloves, glasses. In case of contact with eyes, rinse immediately with lukewarm water for 15 minutes.






