Waterproof | Anti-acid | Anti-bacterial

Insulation Adhesive

Romolo Insulation adhesive by RO9 brand is a product based on Latex, Polymer and modified Resin and water, this product is white and formulated with ionization technology.

خواص فیزیکی و شیمیایی محصول
Special Weight 1.01gr/cm3
Physical mode Concentrated liquid
Particle size 0.17μm
Color White (Colorless)
PH 14
  • Waterproof – Anti acid – Anti bacterial
  • Weight : 1L – 3L – 8L

Romolo Insulation adhesive by RO۹ brand is a product based on Latex, Polymer and modified Resin and water, this product is white and formulated with ionization technology. this product used as a bonding agent in mortars and paints, to prevent the penetration of moisture and water this product is ready to use and is very strong insulation for indoor and outdoor use.
Resistant to +70°c to -50°c | Resistant to frost, salt, and chemicals | Anti-moisture, anti-allergy, and antibacterial | High resistance to UV radiation and CO2 | Strong resistance to frost, humidity and heat | Resistant to cold, dry and humid climates | Resistant to washing with water and detergent | Adhesion to asphalt, wood and most building materials | High resistance to water penetration and different humidity | Ability to be combined with all types of mortar and concrete | Adhesion to concrete and steel, good adhesion to brick and glass

sealing pools, sealing all kinds of water views and all moisture surfaces.
Applicable for a color primer on different surfaces.
Applicable for making paste waterproof adhesive.
Applicable for making strong water-based connexins.
Applicable for coatings sealing, acrylic, and plastic colors.
Applicable for tanks sealing, and sealing all fittings and pipes.
Applicable for roof sealing, services sealing, Sauna, and Jacuzzi sealing.

For sealing surfaces : Cleans the surface of any impurities if the surface has a cavity, fill it with the same mortar then apply Romolo insulation adhesive once horizontally and once vertically with brush or pistol.one liter of Romolo insulation adhesive is enough per square meter.
For sealing concrete : add Romolo insulation adhesive to the ready-mixed concrete inside the mixer, usual usage per cubic meter of concrete is half to one liter of insulating adhesive, avoid adding Romolo insulation adhesive to dry cement.
For sealing acrylic and plastic colors : Mix and apply three modules of paint with two modules of Romolo insulation adhesive
For sealing tile grout powder : Mix and apply each kilogram of tile grouting powder with 2 modules of water and 1 module of Romolo insulation adhesive.
CAUTION : Suitable temperature for the use of Romolo insulation adhesive is 5 – 35°c
Note : Romolo insulation adhesive drying time is between 12 – 72 hours.

Romolo insulation adhesive is available in 1 – 3 – 9Lit buckets.