Romolo High-Strength Concrete adhesive is a single component product, water soluble and based on modified resin that formulated with ionization technology and used as a bonding agent for cementitious mortars.
| Properties | |
|---|---|
| Special Weight | 1.01gr/cm3 |
| Physical mode | Thick liquid |
| Color | White |
| Processing | More than 75% |
| PH | 7 |
Download Datasheet
Products Specifications
Romolo High-Strength Concrete adhesive is a single component product, water soluble and based on modified resin that formulated with ionization technology and used as a bonding agent for cementitious mortars. This product is ready to use and special features of this product are special abstraction and strong connection of new mortar to old concrete that applicable for inside and outside of the building.
It improves chemical resistance | Reduced concrete permeability | Strength against building motions | Increase the compressive strength of concrete | 5% reduction in water consumption of concrete | Reduction of concrete cracks in alkaline environments | High resistance to moisture, steam, acid, and petroleum | High adhesion to concrete and all kinds of building materials | Increased concrete resistance to frozen salts and frozen cycles
Application
The strong connection of new mortar to old concrete | Applicable for all kinds of tile mortars, grouting, and stone | Applicable primer for repair and make stone putty for repair | Applicable for mortar and waterproof coatings on different surfaces | Combinable with putty powder and fill-finish powder to increase adhesion | Applicable for pools sealing, water tanks, water treatment plants and water structures.
How to use
For concrete restoration : Cleans the surface of any impurities and put a layer of concrete adhesive on the cross-section, usual consumption is 4 – 6% by weight of cement consumed. so, for more information please contact us through Romolo website.
For sealing : Per cubic meter of concrete, combine Romolo High-Strength Concrete adhesive with water and add to the concrete, usual consumption is 5 – 9% by weight of cement consumed.
CAUTION : before using keep the contents of the bucket thoroughly stirred for 3minutes.
Packing
Romolo High-Strength Concrete adhesive is available in 1 – 3.5 and 9litr bucket.
