Ionized concrete bonding adhesive
Category : Ionized adhesive
- Features Water, humidity and steam resistance
- Quality : Improved (ionized)
- Processing effect More than 75 %
- Weight : 1L | 3.5L| 9L
- Physical mode : Powder
- Color : White

Ionized concrete bonding adhesive
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Features Water, humidity and steam resistance
- Quality : Improved (ionized)
- Processing effect More than 75 %
- Weight : 1L | 3.5L| 9L
- Physical mode : Powder
- Color : White


Producer : Romolo
Function : 5 / 5 Customer satisfaction rate


Quality authenticity guarantee

Ionized concrete bonding adhesive
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Features Water, humidity and steam resistance
- Quality : Improved (ionized)
- Processing effect More than 75 %
- Weight : 1L | 3.5L| 9L
- Physical mode : Liquid
- Color : White

Producer : Romolo
Function : 5 / 5 Customer satisfaction rate

Quality authenticity guarantee











Physical and chemical properties |
|
Special Weight |
1.01 gr/cm3 |
color |
White |
physical mode |
Concentrated liquid |
PH |
7 |
Effect |
More than 75 % |
APPLICATION :
The strong connection of new mortar to old concrete.
Applicable for all kinds of tile mortars, grouting, and stone.
Applicable primer for repair and make stone putty for repair.
Applicable for mortar and waterproof coatings on different surfaces.
Combinable with putty powder and fill-finish powder to increase adhesion.
Applicable for pools sealing, water tanks, water treatment plants and water structures.
HOW TO USE :
For concrete restoration: Cleans the surface of any impurities and put a layer of concrete adhesive on the cross-section, usual consumption is 4-6% by weight of cement consumed. so, for more information please contact us through ROMOLO website.
For sealing : Per cubic meter of concrete, combine Romolo High-Strength Concrete adhesive with water and add to the concrete, usual consumption is 5-9% by weight of cement consumed.
CAUTION : : before using keep the contents of the bucket thoroughly stirred for 3 minutes.
PACKING :
Romolo High-Strength Concrete adhesive is available in 1, 3.5 and 9LIT bucket
HOW TO MAINTAIN :
Suitable temperature for maintain of tile adhesive is 10-30 ° C The shelf life of the product is 12 months in the original and unopened packaging. Keep away from direct sunlight, cold, extreme heat, and frost.
SAFTEY :
Avoid direct contact with eyes and skin, wear gloves, glasses, and appropriate clothing during the run. In case of contact with eyes, rinse immediately with lukewarm water for 15 minutes.






