Ionized chloride liquid antifreeze is based on chloride, sodium nitrates and mineral calcium, which is formulated with ionization technology. This product accelerates the reaction of cement and reduces the setting of concrete from 12 hours to 3 to 4 hours, which, in addition to its technical advantages, is also cost-effective in terms of economy and implementation speed.
Properties
Special Weight 1.1-1.2gr/cm3
Physical mode Liquid
Color Yellow
PH 7 - 6
Chloride ion Used
Download Datasheet

Romolo ionized chloride liquid antifreeze is based on chloride, sodium nitrates and mineral calcium, which is formulated with ionization technology. This product accelerates the reaction of cement and reduces the setting of concrete from 12 hours to 3 to 4 hours, which, in addition to its technical advantages, is also cost-effective in terms of economy and implementation speed.

Reducing the freezing point of water and concrete Contains fast reactive active ions It has excellent adhesion to all types of concrete and mortar Speed ​​in preparation and implementation, not causing sensitivity Increasing cohesion and durability of concrete and mortar against frost Increasing the speed of setting and hardening of concrete and all types of mortar Increasing de-heating of concrete and early provision of initial strength.

Suitable for cold and frosty areas Suitable for preventing freezing of concrete and mortar Suitable for making concrete and mortar in times of rapid temperature drop Suitable for use in weather conditions with a temperature of +5 to -15 Suitable for quick setting of concrete for quick use of concrete structure.

The use of Romulo chloride liquid antifreeze depends on the ambient air temperature for 8 to 12 hours after concreting, as well as on the quality of the concrete. Therefore, the prediction of ambient temperature changes in order to accurately determine the amount of consumption must be taken into account and act according to the table below. . For example, if a structure (foundation) is poured with 350 kg/m3 concrete and the temperature reaches -7 at night, antifreeze should be used for 2.5% of the weight of the cement used, that is, for each 50 kg bag of cement, 1,250 liters of antifreeze should be used.

Be sure to use chloride anti-liquid only in non-reinforced concrete due to the presence of chloride ions.

Liquid chloride antifreeze is produced and supplied in 20litr gallons.