Romolo ionized porcelain tile adhesive powder
Category : Ionized adhesive
- Application : porcelain | floor, and wall | exterior
- Quality : Improved (ionized)
- Weight : 25kg
- Physical mode : Powder
- Degree of ignition Not used:
- Color : White

Romolo ionized porcelain tile adhesive powder
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Application : porcelain | floor, and wall | exterior
- Quality : Improved (ionized)
- Weight : 25kg
- Physical mode : Powder
- Degree of ignition Not used:
- Color : White


Producer : Romolo
Function : 5 / 5 Customer satisfaction rate


Quality authenticity guarantee


ionized porcelain tile adhesive powder
Category : Ionized adhesive
Quality :
Transfer speed :
Costumer service :
- Application : porcelain | floor, and wall | exterior
- Quality : Improved (ionized)
- Weight : 25kg
- Physical mode : Powder
- Degree of ignition Not used:
- Color : White

Producer : Romolo
Function : 5 / 5 Customer satisfaction rate

Quality authenticity guarantee











Physical and chemical properties |
|
Special Weight |
2.3 gr/cm3 |
color |
white |
physical mode |
powder |
PH |
12 |
Degree of ignition |
– |
APPLICATION :
Applicable on concrete surfaces, prefabricated parts, panel and wood surfaces.
Applicable on plaster surfaces, cement surfaces, tile, glass, and clay surfaces.
Installation of all kinds of tiles, ceramics, antique and plastic stones.
Installation of all kinds of porcelain ceramics in floors, walls, and elevations.
Installation of all kinds of porcelain ceramics in floors, walls, and elevations.
HOW TO USE :
Cleans the surface of any contamination, if you have uniform tile and cement, make a scratch for more adhesion on the surface Then mix each 4 kg of glue with 1 liter of water and mix thoroughly apply mortar in place and behind the tile and Install at the desired level. Consumption is generally 4-5 kg per square meter. Suitable temperature for the use of white porcelain powder is 5-35 ° C.
CAUTION : Romolo white porcelain tile adhesive powder due to low water absorption and almost one percent, It has very high adhesion and The best time to use it after mixing with water is 15-20 minutes.
PACKING :
Romolo white porcelain tile adhesive powder is available in 25kg bags.
HOW TO MAINTAIN :
Suitable temperature for maintain of tile adhesive is 10-30 ° C The shelf life of the product is 9 months in the original and unopened packing. Keep away from direct sunlight, cold, extreme heat and frost
SAFTEY :
Avoid direct contact with eyes and skin, wear gloves, glasses, and appropriate clothing during the run In case of contact with eyes, rinse immediately with lukewarm water for 15 minutes.





